The FLIR thermal camera isn't connecting
What to check when live thermal doesn't start: the Thermal add-on, the phone's Android version, the cable or wireless link.
- In the camera, slide the mode strip to FLIR. The camera connects from there.
- FLIR ONE (plugged in): plug it into the phone's USB-C port. It connects by itself once the FLIR mode is open. Unplug and plug it in again if it doesn't.
- Wireless FLIR (Edge, Edge Pro): turn the camera on, then tap Connect a wireless FLIR.
- If the camera says live thermal is part of the Thermal add-on, the office hasn't switched that add-on on. The owner can add it in the office under Settings → Plan.
- If it says live thermal isn't available on this phone, check Settings → Thermal camera on the phone. Live thermal on Android needs Android 13 or newer.
You can always shoot in the FLIR app and tap Import from the FLIR app to bring the photos into the section.
On iPhone, FLIR appears among the camera's modes only in builds that include FLIR's software. If you don't see it, use the FLIR app and import.