Vistoria Privacy Policy
Version 1.6 · Last updated 14 November 2026 · Effective 18 December 2026
What changed in version 1.6 (takes effect 18 December 2026; until then, version 1.5 applies).
- Report data use has no off switch for a whole business (sections 7A, 9, 12, 13.4 and 15.1A). Earlier versions said an inspection business's owner could switch it off at Settings → Report data use. The office has no such setting. Report data use is part of our terms for every business, and a business leaves out an inspection by marking it Don't use this inspection to improve Vistoria. When this version was published, we had not yet used any report content under Report data use (section 7A.1).
- Section 9.3 now says that our sample agreement text, not our booking pages, includes a notice a business can use.
- Trial offices (section 12.1; added 13 November 2026). A free trial office whose business did not choose a plan is kept until 14 days after the trial ends, and then deleted, after we email its owner. A trial that ends before 18 December 2026 is kept for 60 days, as after a subscription ends.
What changed in version 1.5.1 (13 and 14 November 2026, in effect now). Five changes, and nothing else changed:
- Photo suggestions (sections 7.4A, 7.5 and 11.1). A new section (7.4A, with the matching lines in sections 7.4, 7.5, 11.1 and 13.4) describes a model on Android phones that reads a finding's photos on the phone and puts the likeliest components and conditions first. It was trained on photos and findings from past reports of one inspection business, with its permission, and those photos were processed on RunPod. The model sends no photos anywhere. Every inspection business has it, on every plan and during a trial, and can switch it off.
- An office that never subscribed (section 12.1). A new row says how long we keep an office that has never subscribed and is not a trial: until it is deleted. That is what we already do.
- Location during an inspection (section 6.1A; added 14 November 2026, in effect now). While an inspection is open, the app can use your precise location to start, pause and stop the time on site on its own. The comparison with the property's address happens on your phone; your location is not sent to us or anyone else and is not stored. This describes how the apps already work; it is not a new use.
- Help improve dictation and Count taps are on by default, with a choice at setup (sections 5.5 and 5.5A; changed 14 November 2026, in effect now). When you first set up the app, it shows both settings switched on, says what each sends, and lets you turn either off before anything is counted or sent. Help improve dictation was off by default before. A phone already set up keeps the settings it had. Section 5.5A, on Count taps, is new; it describes a setting the app already had.
- Rewording on the phone (sections 7.4B, 5.3, 7.4, 7.5, 11.1 and 13.4; added 14 November 2026, in effect now). A new section (7.4B) describes the model on the phone that rewords dictated phrases as report wording. It was trained on the text of past reports of one inspection business, with its permission. It runs on the phone and sends nothing. Every inspection business has it and can switch it off; each inspector turns it on for themselves.
The first two apply from 13 November 2026 and the last three from 14 November 2026; the rest of version 1.6 takes effect on 18 December 2026.
What changed in version 1.5 (10 November 2026). This version brings the policy in line with a security review of the office and the apps. Since version 1.4:
- The apps check that they are genuine (section 14.1). When you sign in, and from time to time afterwards, our apps send us the result of a device and app integrity check made by Google or Apple. We keep the outcome with your phone's sign-in.
- What the app keeps on a phone, and when it is removed (sections 14.1, 12 and 3.1). You now sign in to use the app at all. What the app holds for your office is removed from a phone when you sign out, when your office removes that phone, or when the account is deleted. The app asks first if something has not uploaded when you sign out. It does not ask when the office removes the phone or the account is deleted.
- A screen lock is required (sections 14.1 and 14.2). The app will not open on a phone with no screen lock, and you can have it ask for your fingerprint, face or passcode each time it opens.
- Notifications say less (section 16A.2). A notification from the office shows only a general line, such as "Vistoria: a booking update". A job reminder on a locked phone says only that an inspection is coming and when.
- Dictation (sections 5.2, 5.7 and 5.9). We describe more exactly when speech is recognized on your phone, and say that signing out deletes your voiceprint and any recordings still waiting to be sent.
- App diagnostics (section 3.1). The app removes email addresses, sign-in tokens, street addresses and postal codes it recognizes from a log before sending it.
- Save a copy to Photos on Android (section 4.3). A new paragraph describes these copies, which are kept outside Vistoria.
- Exports (section 13.2). The export of a whole office asks for your password and is a set of plain CSV files. An export link never opens without proof of who you are, including while an office is scheduled for deletion.
- Schedule events (section 3.1). Your office can now put things other than inspections on its schedule, such as an appointment or time away. We say what we keep about them and what they are used for.
- More than one client on a job (sections 4.4 and 16.2). An inspection can now have more than one client, such as two people buying a home together. We say what we keep about each of them and which emails each one gets.
- Feedback from the app, and calls from us (sections 3.1 and 12). You can send feedback from the app. Section 3.1 now lists what is sent with it, including the optional picture of your screen, which may show information about your clients. If we call a new office in its first weeks, we keep a short note of the call until the office is deleted.
- Support (sections 3.1 and 11.1). You can write to support inside Vistoria and on our website; those requests, and files you attach, are kept in our own systems. Email sent to support@usevistoria.com is handled by Freshworks (Freshdesk), which has run our email support desk since October 2026 and is listed as a service provider.
- Measuring our ads on our website (sections 3.1, 11.2, 11.5, 17.2A and 17.4; added 12 November 2026). Our marketing website, usevistoria.com, can use Google's tag to measure which of our Google ads lead to visits and sign-ups, only for visitors who accept it there. Nothing changes in the apps or the office.
Version 1.4 (9 November 2026) added section 14.4, on when our support staff can open your account, and updated sections 12 and 13.3.
- Backblaze now holds an encrypted off-site copy of our backups, in Canada (section 11).
Company details
| Legal name | LUMEWORK SOFTWARE INC. (Lumework Software Inc.) |
| Product | Vistoria: the Vistoria apps, the office at vistoria.report and the website usevistoria.com |
| Incorporated in | British Columbia, Canada, incorporation number BC1610392 |
| Registered office | 1063 Montroyal Blvd, North Vancouver, BC V7R 2H5, Canada |
| Mailing address | 1063 Montroyal Blvd, North Vancouver, BC V7R 2H5, Canada |
| Privacy officer | Nahmi Javaheri, Founder and CEO |
| Privacy contact | privacy@usevistoria.com |
| General enquiries | support@usevistoria.com |
| Websites | usevistoria.com and vistoria.report |
Summary
- Vistoria makes software for home inspection businesses. This policy explains what personal information we handle and what we do with it.
- If you are an inspector's client (a homebuyer, seller or agent), your inspector decides how your information is used, and Vistoria stores it for them. See section 15, and contact your inspector first.
- We do not sell personal information. The apps and the office use no advertising or tracking tools. Our marketing website measures which of our ads bring visitors, with Google's tag, only if you accept it there (section 17.2A). We do not market to inspectors' clients.
- We never receive your dictation audio. Dictation is turned into text on your phone, or by your phone's own speech service. Video clips you record keep their sound and are stored like photos (section 5). The only other recordings of your voice we receive are sentences you choose to read aloud for Help train dictation, which is off until you turn it on (section 5.9).
- AI features are optional and off until you turn them on. When they are on, the text involved is sent to Anthropic, which may not use it to train its models (section 7).
- Vistoria may use photos, video clips (without sound) and written findings from inspection reports to improve Vistoria's own models, after removing names, addresses, contact details, signatures and other identifying information, and never using photos of faces, licence plates, documents or the front of a house (section 7A). An inspection business can leave out any inspection.
- Photo suggestions on Android phones run entirely on the phone and send no photos (section 7.4A).
- Vistoria is offered in Canada and the United States only.
- Our servers are in the United States. Our backups are in Canada: on our own server in British Columbia, with an encrypted copy held by Backblaze in Ontario (section 10). The companies that handle information for us are listed in section 11.1.
- You can see, correct, export and delete your information. You can delete your account in the app or at vistoria.report/delete-account (section 13).
- Questions go to our privacy officer at privacy@usevistoria.com.
Contents
- Who we are
- Two kinds of information, two roles
- Information about our customers and their users
- Information our customers put in about their clients
- How dictation works
- Location
- AI features
7A. Report data use
- Google user data (Google Calendar)
- How we use information
- Where information is stored
- Who we share information with
- How long we keep information
- Your choices and rights
- Security and breaches
- If you are an inspector's client
- Emails and unsubscribing
16A. Notifications
- Cookies and analytics
- Children
- Changes to this policy
- Contact us
---
1. Who we are
1.1 This policy is published by LUMEWORK SOFTWARE INC. ("Vistoria", "we", "us"), a British Columbia company whose details are at the top of this page. We make software for home inspection businesses.
1.2 It applies to:
- our websites, usevistoria.com and vistoria.report;
- the Vistoria office at vistoria.report;
- the Vistoria apps for Android, iPhone and iPad, published by LUMEWORK SOFTWARE INC.;
- the pages we host for our customers' clients: booking pages, signing pages, online reports and invoice payment pages;
- the emails we send.
1.3 Our privacy officer is responsible for our compliance with this policy. You can reach them at privacy@usevistoria.com, or by mail at our mailing address marked "Attention: Privacy Officer".
1.4 For our customers, our Terms of Service and Data Processing Addendum also apply. If this policy and the Data Processing Addendum differ about information our customers put into Vistoria, the Data Processing Addendum applies.
1.5 Where Vistoria is offered. Vistoria is offered in Canada and the United States only. This policy is written for the privacy laws that apply there: the Personal Information Protection and Electronic Documents Act (PIPEDA), the Personal Information Protection Acts of British Columbia and Alberta, Quebec's private-sector privacy law, and US state privacy laws. We do not offer Vistoria to people or businesses elsewhere.
2. Two kinds of information, two roles
2.1 We handle two kinds of personal information, and our role is different for each.
2.2 Information about our customers. Our customers are home inspection businesses. We handle information about the business, its owner, and its inspectors and other staff (together, "users"), and about visitors to our websites. For this information, Vistoria is responsible, and this policy explains how we handle it.
2.3 Information our customers put into Vistoria about other people. Our customers use Vistoria to record information about their own clients and contacts: homebuyers, sellers, real estate agents, people who sign agreements or book inspections, and the homes they inspect. For this information, the inspection business is responsible. Vistoria handles it only on the business's behalf, to provide Vistoria to them, under our Data Processing Addendum at vistoria.report/dpa. We act as their service provider (in some laws, a "processor").
2.4 If you are an inspector's client, see section 15 and contact your inspector first.
3. Information about our customers and their users
3.1 We collect the following when you sign up for or use Vistoria:
| Category | What it includes | Where it comes from |
|---|---|---|
| Account | Name, email address, phone number, role, and a password, which we store only in hashed form | You |
| Agreement to our terms | Which version of the Terms of Service, App Licence and Privacy Policy you agreed to, when, and whether on the web or in an app | You |
| Invitations | If someone invites you to Vistoria with a code: your email address, the offer attached to it, who sent it, and when it was used. We keep only a scrambled (hashed) form of the code itself | The person who invited you |
| Two-step sign-in | Whether it is on, a secret for your authenticator app (stored encrypted), your recovery codes (stored hashed), and the browsers you choose to trust | You |
| Company | Business name, logo, postal address, phone, website, licence numbers, report and email settings, and prices for your services | You |
| Schedule events | Things your office puts on its schedule that aren't inspections, such as an appointment, a day off or time away: the title, the times, how it repeats, any note, and who in the office it is for. We keep them with the rest of your office's data and use them only to show your schedule (including in the calendar feed, if your office uses it) and to keep those times from being booked. They are deleted with the rest of your office's data | You, or someone else in your office |
| Devices | A name for each phone you sign in on, and a sign-in token for it that you can revoke. Signing out on the phone ends that phone's token | Your phones |
| Billing | Your plan, add-ons, invoices, payment status, any offer you signed up with, the business address used for taxes, and a record of who agreed to extra charges and when. We do not receive your full card or bank account number | You and our payment processor |
| Payment and accounting connections | If your business takes online payments from its clients through Vistoria, the keys for its own account with the payment processor it uses (currently Helcim); if it connects QuickBooks Online or Xero, the keys for that connection. Both are stored encrypted | You |
| Your signature | An image of your signature, if you add one to print on your reports | You |
| Support | What you tell us when you write to support or send feedback, in Vistoria, on our website or by email, including files you attach. From the app, it also includes the app version, your phone's model and operating system version, whether the phone was on Wi-Fi, on mobile data or offline, and the name of the screen you sent it from. If you choose to attach a picture of your screen, it shows whatever was on that screen, which may include information about your clients; only our support staff see it, and it is kept and deleted like other files attached to support messages | You |
| Calls from us | If we call your office in its first weeks, a short note of how the call went (for example, that we left a message) and who made it | Our staff |
| Website enquiries | Your name, email address and message, if you use the contact form on usevistoria.com, and your answers, if you fill in the beta questionnaire there. They are emailed to us; the website does not keep them | You |
| Security logs | The time of sign-ins and important actions, your IP address and your browser type | Your browser or phone |
| App diagnostics | Technical logs from the app: the app's own log lines, crash reports, the app version, the phone model and operating system version, and which account and office the phone is signed in to. They are sent when the app is updated, once a day, after a crash, and when you tap Send logs. Before a log is sent, the app removes the email addresses, sign-in tokens, street addresses and postal codes it recognizes. Logs may still incidentally contain inspection details; we use them only to find and fix problems. Your office's owner can also read the logs of the office's phones | The apps |
| Website analytics | Counts of page visits and page load times on usevistoria.com, without cookies (section 17) | Your browser |
| Website ad measurement | Only if you accept it on usevistoria.com: whether you came from one of our Google ads, and whether you then asked for a setup call, asked about the beta, or clicked to sign up or to open the demo office (section 17.2A) | Your browser, through Google's tag |
3.2 We do not collect your phone's contacts, your photo library (other than photos you choose to import), or information from other apps on your phone.
4. Information our customers put in about their clients
4.1 When an inspection business uses Vistoria, it and its clients may put in the following, including records the business imports from software it used before Vistoria. We hold it for the business.
| Category | What it includes |
|---|---|
| Client, agent and lead details | Names, email addresses, phone numbers and postal addresses of clients, sellers, real estate agents, prospective clients, and the lawyers, notaries or escrow agents handling a closing |
| Property details | The property's address, and details such as its size and age |
| Inspection content | Photos, video clips (which may include sound), thermal images, dictated and typed notes, findings, descriptions, limitations and the report |
| Booking requests and changes | What someone enters on the business's public booking page: name, contact details, the property, the service and preferred times; and, if the client later moves or cancels the booking with the link in their email, the change and when it was made |
| Signed agreements | For each signature: the signer's name and email address, the exact text signed and a fingerprint (SHA-256 hash) of it, the drawn or typed signature, the time, and the IP address and browser (or, for signing on the inspector's phone, the phone's clock and the device) |
| Invoices | Amounts, what they were for, and whether they were paid. Online payments are made through the business's own account with its payment processor (currently Helcim); we receive the payment status, not card or bank details |
| Emails | Emails sent through Vistoria, whether they were delivered, and whether someone unsubscribed from follow-up emails |
| Team messages | Messages and attachments in the business's team room, notes on leads, and the reports, blocks and removals made in the team room (which Vistoria keeps to deal with abuse), if it uses Vistoria Teams |
| Appliance data | Text read from appliance data plates (such as brand, model and serial number). The phone reads the plate itself; the text is saved with the inspection |
| Imported records | What the business imports from software it used before Vistoria (such as Horizon by Carson Dunlop): contacts, past jobs (dates, property addresses, clients, agents, fees and whether they were paid, and past agreements with the record of their acceptance, including the IP address that software recorded), past reports, and email templates |
| Calendar content | Only if a user connects Google Calendar: the title and time of another event in that calendar that clashes with a booking (section 8) |
4.2 Photos of homes may show people, belongings, documents or vehicles. Inspectors control what they photograph and what goes into their reports.
4.3 Save a copy to Photos (Android). The Android app has a setting, on by default, called Save a copy to Photos. While it is on, each photo and video clip you take in the app is also copied to a "Vistoria" album in your phone's own gallery. The copies are named by date and time only, and carry no address, client name or location. They are outside Vistoria: other apps you allow, and your phone's cloud backup, can see them. They are not removed when you sign out or when the app's data is removed from the phone (section 14.1); delete them in your phone's Photos app. You can turn the setting off in the app's Settings. The iPhone app does not make these copies.
4.4 More than one client on a job. An inspection can have more than one client, such as two people buying a home together: the first client and up to three more. Each client's name, email address and phone number are kept in the same way as the first client's, for the same purposes, and deleted in the same way. Each client is named on the report and on the agreement, signs the agreement with their own link, and becomes a contact in the business's client list. The invoice is addressed to the first client and names the others. Which emails each client gets is in section 16.2.
5. How dictation works
5.1 Inspectors can dictate notes into the Vistoria app. Vistoria never receives or keeps the audio of your dictation. Only the resulting text is saved and synced. (Video clips are different: see section 5.4. So are the sentences you choose to record for Help train dictation: see section 5.9. Those are never recordings of your dictation during an inspection.)
5.2 How your speech is turned into text depends on your phone:
- Vistoria's offline speech model. When Vistoria's own speech model is installed, the app uses it, unless you choose your phone's own speech service in Settings → Dictation. Speech is then recognized entirely on your phone.
- Your phone's own speech service. Otherwise, the app uses the speech recognition built into your phone (Google's on Android, Apple's on iPhone), and asks it to recognize your speech on the phone. Where your phone cannot do that, its speech service (Google or Apple) may process the audio under its own terms. Vistoria never receives the audio.
5.3 Vistoria can also reword dictated phrases into report language. The rewording that runs on your phone sends nothing anywhere (section 7.4B). The optional rewording that runs through the office uses AI, as section 7 describes.
5.4 Video clips record sound when you allow the microphone. That sound is part of the clip, is stored with it like a photo, and is not transcribed.
5.5 Help improve dictation (optional). The app has a setting, on by default, called Help improve dictation. When you first set up the app, it shows you this setting with what it sends, and you can turn it off there; nothing is sent before you have made that choice. If someone else later signs in on the same phone, the setting starts off for them. While it is on, the app sends us, for each dictated phrase: the text as it was recognized, the wording kept in the report, the section and kind of note, and counts of how often the on-phone rewording was kept or undone. It never sends audio or photos. When the text arrives, and before it is stored for training, we remove phrases that appear to contain names, email addresses, phone numbers or street addresses. We use it only to train and test Vistoria's own dictation models, which are then used by all our customers. We keep it for up to 3 years. It is kept even if your office later leaves Vistoria, unless you ask us to delete it. You can turn the setting off at any time, and ask us at privacy@usevistoria.com to delete the text your office sent. Deleting it removes the stored text; it does not change models already trained with it.
5.5A Count taps (optional). The app has a setting, on by default, called Count taps to improve the app. While it is on, the app counts how many taps, keystrokes and dictated phrases it takes to write a finding, a Description item or a limitations step, and how long it takes. Only the counts are kept, with the inspection, as part of your office's data; never what was typed, said or photographed. They are used to find where the app takes more steps than it should. The app shows this setting, with the same explanation, when you first set it up, next to Help improve dictation, and nothing is counted before you have made that choice. You can turn it off there, or at any time in the app's Settings.
5.6 Focus on my voice. This setting (on by default) uses your phone's own voice processing (the kind a phone call uses) to reduce background noise while you dictate. It happens on your phone; nothing extra is sent anywhere.
5.7 Only my voice (optional). If you turn this on, the app asks you to read one sentence aloud and makes a voiceprint: a list of numbers describing how your voice sounds, from which the recording cannot be recreated. It then compares each dictated phrase with your voiceprint and leaves out phrases that sound like someone else, such as a client or agent speaking nearby. The voiceprint and the comparison stay on your phone only: they are never sent to Vistoria or anyone else, and the sentence you read is not kept. Other people's speech is compared on the phone for a moment and then discarded; it is not written down or stored. You can switch this off, or learn your voice again, in Settings → Dictation; signing out of the app or uninstalling it deletes the voiceprint. Because a voiceprint describes your voice, we treat it as sensitive, and we only make one when you ask us to. It is kept only until you turn this off, learn your voice again, sign out of the app or uninstall it, and Vistoria never receives, sells or discloses it.
5.8 Speech, voice and text models. The app may download speech, voice and text models from public model libraries (Hugging Face, GitHub and Google's MediaPipe model storage), and Vistoria's own rewording model from the office. Downloading a model sends nothing about you or your work to those sites beyond an ordinary download request.
5.9 Help train dictation (optional voice recordings). The app has a setting, off until you choose it, called Help train dictation. Before anything is recorded, the app explains what this section says and asks you to agree.
- What is recorded. Only sentences you choose to read aloud in the recording screen. The app shows you one sentence at a time, written by us in the language of inspection reports, and records only between your tapping Record and Stop. It never records your inspections, your dictation, your clients or anything else, and it never records in the background.
- What we receive. Each recording (a short sound file), the exact sentence you read, your account (so that your recordings can be counted and deleted), your phone's model, the recording's format, and the version and time of your agreement. Recordings wait on your phone until they are sent, and are sent only while you are signed in. Any still waiting when you sign out are deleted from the phone and never sent.
- What we use it for. Only to train and test the speech recognition in Vistoria, so that it understands how inspectors speak. The speech models we build are part of Vistoria and are used by all our customers. We do not use the recordings to identify you or anyone else, and we do not make a voiceprint from them. We do not sell them, share them for advertising, or give them to anyone else for their own use.
- Who can access it. Only Lumework Software staff and contractors working on Vistoria's speech recognition, who are bound by confidentiality. Your office's owner and other users cannot listen to your recordings.
- Where it is kept. Recordings are stored in the United States with our other files (section 10), and copied to our own server in British Columbia, Canada, where we train our models. If we rent computing power for a training run (RunPod, section 11.1), recordings are processed there for that run only and not kept.
- How long we keep it. Until you delete them, your account is deleted, or your office is deleted, whichever comes first.
- Deleting them. Tap Delete my recordings in Settings → Dictation → Help train dictation, at any time. That deletes every recording you have made from our live systems straight away, and stops further recordings until you agree again. Copies on our training server are deleted within 30 days, and copies in backups as the backups expire, within a further 35 days. Deleting recordings does not change models already trained with them; those models do not contain the recordings themselves. Turning the setting off without deleting stops new recordings and keeps the ones you have already made.
Help train dictation is separate from Help improve dictation (section 5.5), which sends text only.
6. Location
6.1 When you open the schedule in the app, it may ask for your approximate location, to estimate the drive to your first job of the day. If you allow it, your approximate location is sent once for that estimate (to Vistoria's servers, which ask Google Maps for the drive time) and is not stored by Vistoria. You can refuse or withdraw this permission in your phone's settings at any time; the schedule then works without it.
6.1A While an inspection is open, the app may ask for your precise location. It compares your location with the property's address, on your phone, so the time on site starts, pauses and stops on its own. Your location is not sent to Vistoria or anyone else and is not stored; only the resulting times are saved with the inspection. You can refuse or withdraw this permission in your phone's settings; the time on site then starts with the first photo, and you can always start and stop it by hand.
6.2 Vistoria does not track your location in the background. The Vistoria camera does not add location to the photos it takes. Photos you import from elsewhere may carry location data that your phone or camera recorded.
7. AI features
7.1 Some Vistoria features use artificial intelligence provided by Anthropic PBC ("Anthropic"), a company in the United States. Each is optional and off until you turn it on, and the switch names Anthropic. On the phone, the app also asks each user before it first sends anything to Anthropic:
| Feature | What is sent to Anthropic |
|---|---|
| Rewording dictation through the office | The dictated phrase, and the kind of note it is |
| Reviewing a report before you send it | The report's findings, descriptions, limitations and summary. Not the client's name, the property address or photos |
The office assistant's calendar features (section 8) do not use AI and send nothing to Anthropic.
7.2 Anthropic processes this content for us, as our service provider, under its commercial terms and data processing addendum:
- Anthropic may not train its models on this content;
- Anthropic deletes it within 30 days, except content flagged as breaking its usage policy, which it may keep for up to 2 years, or content it must keep by law;
- we keep a count of each office's AI requests and their cost, to apply usage limits; not the content;
- we have set Anthropic to process our content in the United States only.
7.3 AI output can be wrong. An inspector decides what goes into a report or an email.
7.4 Some features run on your phone without sending the content anywhere: the rewording model on the phone (section 7.4B), the meaning search, photo suggestions on Android (section 7.4A), and reading data plates (with Google's ML Kit on Android and Apple's Vision on iPhone; section 11.2 explains the technical information ML Kit may send).
7.4A Photo suggestions (Android). When a finding has photos, the Android app can read them and put the components and conditions they most likely show first in the lists the inspector picks from. It only changes the order: it never picks, ticks or writes anything. The model runs entirely on the phone, which downloads it from the inspection business's office, and no photo is sent anywhere for it. We trained the model on photos and findings from past inspection reports of one inspection business, which gave us its permission. Before training, the photos were reduced in size and their location and other metadata were removed. They were processed on our own server and on RunPod (section 11.1). The model does not contain those photos. It is separate from Report data use (section 7A): other businesses' inspections are not used to train it. An inspection business can switch it off in the office, at Settings → AI → Photo suggestions on the phone, and its phones then remove the model the next time they check with the office; each user can also switch it off on their own phone, at Settings → Your walk. Every inspection business has it, on every plan and during a trial, unless it switches it off. It is not offered on the iPhone.
7.4B Rewording on the phone. The app can reword each dictated phrase as report wording with a model that runs entirely on the phone, which downloads it from the inspection business's office; nothing is sent anywhere for it. We trained the model on the text of past inspection reports of one inspection business, which gave us its permission, on our own server and on RunPod (section 11.1). Every inspection business has it, on every plan and during a trial. An inspection business can switch it off in the office, at Settings → AI → Rewording on the phone, and its phones then remove the model the next time they check with the office. On the phone it stays off until the inspector turns it on, at Settings → Dictation → Reword each phrase.
7.5 We do not use your reports, photos or your clients' information to train AI models, except the dictation text you choose to share under section 5.5, de-identified report content under Report data use (section 7A), and, for photo suggestions and rewording on the phone, the past reports of the one inspection business that gave us its permission (sections 7.4A and 7.4B). Our AI providers never train their models on any of these.
7A. Report data use
7A.1 What it is. Under our terms, from 4 October 2026, we may use photos, video clips (without their sound), written findings, captions, descriptions and limitations from the business's inspections, together with technical details such as the report section, the component, and the camera and capture settings, to train, test and improve Vistoria's own models and features. We call this Report data use. Those models are part of Vistoria and are used for all our customers. It applies only to inspections created or changed on or after that date. It is part of our terms for every inspection business; there is no setting that switches it off for a whole business, and a business leaves out an inspection as section 7A.6 describes. When this version was published (10 November 2026), we had not yet used any report content under Report data use.
7A.2 What we remove first. Before any of this information is used, we remove the names of clients, agents and anyone else; property addresses and unit numbers; contact details; signatures; payment details; and any other personal or sensitive information we find in it.
7A.3 What we never use:
- photos in which a person's face, a licence plate, or a document (such as identification, mail or paperwork) can be seen;
- the cover photo of an inspection, and photos of the outside of a home that show its street-facing side;
- photo location (GPS) data, and any other identifying metadata beyond technical capture details;
- voice: the sound recorded in video clips, and anything said while dictating (dictation is turned into text on the phone, and only the text an inspector keeps in the report can be used);
- anything from a connected Google account (Google Calendar), as section 8.6 promises;
- inspections of properties in Quebec;
- any inspection the inspector has marked Don't use this inspection to improve Vistoria;
- signed agreements, invoices, emails and team messages.
7A.4 Our commitments. We do this so that no person or property can reasonably be identified from what we keep, alone or combined with other information, and we check the result and keep a record of how we de-identified it. We will not try to re-identify any person or property, and anyone who handles this information for us must agree to the same. Where we use automated tools to find faces in photos so that we can leave those photos out, the tools only detect that a face is present: they do not create face templates, faceprints or any other biometric identifier. We do not sell it, share it for anyone else's own use, use it for advertising, or use it to profile anyone. Our AI providers (section 7) may not train their models on it.
7A.5 Where it is processed. De-identified information may be processed on our own systems and by the training providers listed in section 11.1, in the United States and Canada.
7A.6 Leaving an inspection out. Each inspection has the choice Don't use this inspection to improve Vistoria in its job details, in the office and in the app. Once an inspection is marked, we do not use it from then on. Models already trained are not changed. A business can also ask us at privacy@usevistoria.com to remove material that has already been used, and we will leave it out of future training.
7A.7 How long we keep it. We keep de-identified copies for as long as we use them to train and test our models, and for no more than 5 years after they were collected, even if the business later leaves Vistoria.
7A.8 If you are an inspector's client, see section 15.1.
8. Google user data (Google Calendar)
8.1 This section applies only if you connect a Google account to Vistoria in the office, to keep your booked inspections on your Google Calendar, keep your booking page from offering times you are busy, and have the office assistant show you where other events in your calendar clash with your jobs.
8.2 What Vistoria asks for. When you connect Google, Vistoria asks for your permission to:
- read and write events on your calendar (calendar.events), and check when you are busy (calendar.freebusy);
- see your Google account's email address (openid, email), only to show which account is connected.
Vistoria does not ask for access to your Gmail, and does not read or send your email.
8.3 How Vistoria uses it. We use this access only to provide these features, inside the Vistoria office:
- keeping your booked inspections written to your calendar, and removing cancelled ones. Each event carries the property address, the time, the client's and agents' names and contact details, the property's details, the inspector and a link to the job in the office;
- checking when you are busy, so that your booking page does not offer those times;
- reading the titles and times of your upcoming events, to show where your bookings and booking requests clash with other events in your calendar.
8.4 How it is processed and stored.
- Calendar information is not sent to Anthropic or any other AI provider.
- We do not store copies of your calendar. We keep the identifiers of the events Vistoria created, and, for each clash shown to you, the other event's title and time. We delete each clash after 30 days, and all of it when you disconnect Google. When you are busy is read when needed and not stored.
- We store your Google access tokens encrypted.
8.5 Who can see it. A calendar clash is shown to the inspector on that job and to the office's owner. No person at Vistoria reads your calendar unless you ask us to, it is needed for security (such as investigating abuse), or the law requires it.
8.6 What we never do with it.
- We do not use Google user data for advertising, and we do not sell it.
- We do not transfer it to anyone except as needed to provide these features (our hosting providers in section 11), for security, to comply with the law, or as part of a merger or sale of our business, and then only with your prior consent.
- We do not use Google Workspace data to develop, improve or train generalized or non-personalized AI or machine-learning models.
8.7 Disconnecting. You can disconnect Google at any time in the office (Settings → Online booking → Google) or at https://myaccount.google.com/permissions. When you disconnect, we revoke our access at Google and delete your tokens, the identifiers of the events Vistoria created, and the clashes shown to you. Events already written to your calendar stay there unless you delete them.
8.8 Limited Use. Vistoria's use and transfer to any other app of information received from Google APIs will adhere to the Google API Services User Data Policy, including the Limited Use requirements. Vistoria's use of information received from Google Workspace APIs (Google Calendar) will also adhere to the Google Workspace API User Data and Developer Policy.
8.9 Google Maps. Vistoria uses Google Maps to estimate drive times and suggest the order of a day's jobs. The addresses of jobs, and your approximate location if you allow it (section 6), are sent to Google for that purpose, and job addresses are sent to Google to place them on a map. When you type an address into an address field in the office or the app, what you type is sent to Google Places, through our servers, to suggest matching addresses; the same happens on a business's booking page when a client types the property's address. The Vistoria apps also draw maps of the day's jobs with Google's Maps SDK for Android and iOS; when a map is shown, Google receives the map area requested and information about how the map is used and performs, which it uses to provide and improve the map. Google's use of this information is governed by the Google Privacy Policy at https://policies.google.com/privacy.
9. How we use information
9.1 Information about our customers and users. We use it to:
- provide the service: create your office, sign you in, sync your phones, and show your data to the people you allow;
- keep Vistoria and your account secure, and prevent fraud and abuse;
- find and fix problems, using app diagnostics and security logs;
- bill you and keep business and tax records;
- answer your support requests and website enquiries;
- send you service messages, such as receipts, security alerts, and notice of changes to our terms, prices or this policy;
- tell you about new Vistoria features, where we have your express or implied consent under anti-spam law (every such email has an unsubscribe link);
- meet our legal obligations;
- improve Vistoria using aggregated or de-identified information that does not identify you, your users or your clients, including under Report data use (section 7A).
9.2 Information our customers put in about their clients. We use it only to provide the service to the inspection business, as it instructs. For example, we store it, show it to the business's users, produce its reports, host its booking and signing pages, and send the emails it sets up. We also use it to keep the service secure and to comply with the law, and, except for inspections the business has marked to leave out, we de-identify parts of it and use them to improve Vistoria's models as section 7A describes. We do not use it to market anything to the business's clients, and we do not sell it or share it with other companies for their own use.
9.3 Consent. We rely on your agreement to our terms, and on the choices you make in the app and office (for example, turning on the assistant, an AI feature, Help improve dictation or Help train dictation), as your consent to the uses described here. You may withdraw consent at any time, subject to legal or contractual limits; some features will then stop working. The inspection business is responsible for having the right to give us its clients' information, and for telling its clients about Vistoria, including about Report data use and how to ask for their inspection to be left out. Our sample agreement text includes a notice it can use.
9.4 Other purposes. We will not use personal information for a purpose not described in this policy without telling you first, and asking for your consent where the law requires.
10. Where information is stored
10.1 Vistoria's servers and most of our service providers are in the United States; our database and our servers run in the western United States (Oregon), and photos, clips, files and Help train dictation recordings are stored in the United States. Our encrypted backups are kept on our own server in British Columbia, Canada, and an encrypted copy of them is held by Backblaze in Ontario, Canada.
10.2 Information stored in another country is subject to that country's laws, and may be accessed by the courts, law enforcement and national security authorities of that country.
10.3 Our service providers are bound by contract to protect the information and to use it only to provide their service to us (section 11).
11. Who we share information with
11.1 Service providers. We use the service providers below to run Vistoria. Each is bound by contract to protect the information, to give it protection comparable to ours, and to use it only to provide its service to us.
| Provider | What they do for us | Where the data is |
|---|---|---|
| Vercel Inc. | Hosts the office, its web pages and APIs; stores photos, clips and files (Vercel Blob) | United States |
| Neon (Databricks, Inc.) | Database | United States |
| Amazon Web Services, Inc. | Email delivery infrastructure (Amazon SES), used by Resend | United States |
| Resend (Plus Five Five, Inc.) | Sends email from the office | United States |
| Anthropic PBC | AI features, only if turned on (section 7) | United States |
| Google LLC | Vistoria's own email (Google Workspace) | United States and other countries where Google operates |
| Helcim Inc. | Processes subscription payments to Vistoria | Canada and United States |
| Freshworks Inc. (Freshdesk) | Our email support desk: holds the messages you email to support@usevistoria.com and our replies. Requests made inside Vistoria or on our website are not sent to it | United States |
| Backblaze, Inc. | Holds an encrypted copy of our backups, in case our own are lost. Backblaze cannot read them | Canada |
| Google LLC (Firebase Cloud Messaging) | Delivers notifications to the Vistoria apps (section 16A) | United States |
| Apple Inc. (Apple Push Notification service) | Delivers notifications to iPhones, behind Firebase (section 16A) | United States |
| RunPod, Inc. (only when we rent GPU computing; otherwise training runs on our own server) | Computing power to train Vistoria's models on de-identified information under Report data use (section 7A), on Help train dictation recordings (section 5.9), and, in September and October 2026, on the report text and the photos the rewording and photo suggestions models were trained on (sections 7.4B and 7.4A); receives only information already de-identified, those recordings for the length of a training run, and those photos reduced in size with their metadata removed | United States (RunPod); Canada (our own server) |
Our encrypted backups are kept on Vistoria's own server in British Columbia, Canada, with an encrypted copy held by Backblaze in Ontario, Canada.
We keep a current list at vistoria.report/subprocessors. We will post a new provider there, and email our customers, at least 30 days before it starts handling information our customers put into Vistoria.
11.2 Independent services. Some companies handle information under their own privacy policies, not as our service providers:
- The inspector's payment processor (currently Helcim), when a client pays an inspector online through the inspector's own account with that processor. The processor handles the payment under its own privacy statement; Vistoria passes it only the invoice details needed to take the payment;
- Google Maps, which receives job addresses and, if you allow it, your approximate location, to estimate drive times (section 8.9);
- your own Google account, if you connect Google Calendar: Vistoria writes your booked inspections to it (including the client's and agents' names and contact details) and reads it at your instruction, and Google holds it under your own agreement with Google (section 8);
- Apple and Google, when you download the apps from their app stores, and when your phone's speech service processes dictation (section 5);
- Google's ML Kit (on Android), which reads data plates on the phone. It may send Google technical information about how it is performing, such as the phone model, the app's name and error codes, but not the images or the text it reads;
- Google (Google Ads and Google Tag Manager), only on our marketing website, usevistoria.com, and only if you accept ad measurement there (section 17.2A). Google receives what that section lists under its own privacy policy, and may process it in the United States and other countries where it operates;
- public recall databases (the US Consumer Product Safety Commission and Health Canada). Recall lookups use only an appliance's brand and model, never personal information;
- your own accounting software (QuickBooks Online or Xero), if your office connects it. Vistoria then sends that account, at your office's instruction, the client's name and contact details, invoices (lines, taxes, totals) and payments recorded in Vistoria, so your books match. The accounting provider holds that information under your office's own agreement with them. Vistoria keeps the connection's access keys encrypted and records what it sent; your office can disconnect at any time, after which Vistoria sends nothing more and deletes the keys.
11.3 Within your office. Information in your office is visible to its users according to their role. Reports and invoices are visible to anyone who holds their private link, which your office sends to your client and their agents. If your office uses the calendar feed, anyone with its private address can see your booked jobs; you can replace that address at any time in Settings → Calendar, which stops the old one working.
11.4 Other disclosures. We may also disclose information:
- when the law requires it, such as under a court order or subpoena, after telling the affected customer where the law allows;
- to protect the safety of any person, or the security of our service;
- to our professional advisers, under duties of confidentiality;
- as part of a merger, acquisition or sale of all or part of our business, to the buyer, who must protect it as this policy describes. We will tell you before your information becomes subject to a different privacy policy. Google user data is transferred only with your prior consent (section 8.6).
11.5 We do not sell personal information, and we do not share it for advertising. The only advertising tool we use is the ad measurement on our marketing website, which runs only with your consent and tells Google which of our own ads led to a visit or a sign-up (section 17.2A).
12. How long we keep information
12.1 We keep personal information only as long as we need it for the purposes in this policy, or as the law requires.
| Information | How long we keep it |
|---|---|
| Your account and your office's data | While your subscription is active |
| A trial office whose business did not choose a plan | Until 14 days after the trial ends (60 days for a trial that ended before 18 December 2026). We email the owner before we delete it, then delete it from our live systems, and from backups within a further 35 days |
| An office that has never subscribed and is not a trial | Until it is deleted |
| After your subscription ends | Your office stays available to export, read-only, for 60 days. We then delete your data from our live systems within 30 days. Copies in backups are deleted as the backups expire, within a further 35 days |
| After the owner deletes the office's account | Deletion is scheduled for a date no more than 30 days after the owner confirms it by email (the date is in the email), and can be undone until then. On that date we delete your data from our live systems, and from backups within a further 35 days. When the owner confirms, every phone signed in to the office is signed out, and the app removes the office's data from each phone the next time that phone reaches the office |
| After any other user deletes their account | We delete their sign-in and personal account details within 30 days of their confirming it by email, and from backups within a further 35 days. The records they worked on stay with the business. When they confirm, the phones signed in to their account are signed out, and the app removes the account's data from each phone the next time that phone reaches the office |
| A record that an account or office was deleted (dates and counts only) | 12 months |
| Data exports you create | The export file is deleted 7 days after it is made, and its download links stop working then or sooner (when you change your password, sign out everywhere, or withdraw the links) |
| Records of your agreement to our terms | Kept with your account, and deleted with it |
| A job or team message deleted in the office or app | A job is restorable for 30 days, and a team message is kept for 30 days; then they are deleted from our live systems. Copies in backups are deleted within a further 35 days |
| A photo removed from a job, or a contact deleted | A photo removed from a job stays in that job's version history, and is deleted with the job. A contact is deleted from our live systems straight away. Copies in backups are deleted within a further 35 days |
| Signed-agreement records | Kept with the inspection, and deleted with it. When an office is deleted, they are deleted too, so we remind the business to export them first |
| Invoices, receipts and billing records for your subscription | As long as tax law requires (in Canada, generally 6 years after the end of the tax year they relate to) |
| Security logs and app diagnostics | 12 months |
| Office assistant items, including calendar clashes | 30 days, or until you disconnect Google, whichever is sooner |
| Identifiers of calendar events Vistoria created | Until you disconnect Google, or the job is deleted |
| Dictation text shared under section 5.5 | Up to 3 years, or until you ask us to delete it, including after your office leaves Vistoria |
| Voice recordings under Help train dictation (section 5.9) | Until you delete them, your account is deleted, or your office is deleted, whichever comes first. Copies on our training server are deleted within 30 days after that, and copies in backups within a further 35 days |
| De-identified copies under Report data use (section 7A) | While used to train and test our models, and no more than 5 years after collection |
| Unsubscribe records | As long as needed to honour the unsubscribe |
| Records of security breaches | At least 24 months after we learn of the breach, as Canadian law requires |
| Support messages and website enquiries | 2 years after the conversation ends, including after your account or office is deleted. Files attached to them are deleted when the account or office is |
| Notes of our calls to your office | Until your office is deleted |
| Records of support staff opening an account, or acting on one (section 14.4) | 24 months, including after the account or office is deleted |
12.2 If we have used personal information to make a decision about a person, we keep it for at least one year after that decision, as BC law requires.
12.3 Information that has been de-identified so that it no longer identifies anyone may be kept.
13. Your choices and rights
13.1 See and correct. You can see and correct your account information in the office (Settings → Your account), and your company details in Settings → Your business.
13.2 Export. The owner can export the office's data at any time (Settings → Export): jobs, contacts, invoices, tax summaries, reports, files and signed agreements. The export of the whole office asks for your password again, is a set of plain CSV files with links to your photos, files and reports, and is emailed to you as a link; the link works for 7 days, only while you are signed in to your office, and you can withdraw it in Settings → Export. If your office is scheduled for deletion and so cannot be signed in to, the link asks for your email, your password and a sign-in code before it opens anything.
13.3 Delete your account. You can delete your Vistoria account, and the data that goes with it:
- in the Vistoria app for Android or iPhone: Settings → Account → Delete my account;
- on the web, without the app: vistoria.report/delete-account.
To keep your account and delete only some of your data (such as your voice recordings, your saved signature, or the phones and browsers you have signed in on), use vistoria.report/delete-data.
If you are the owner, you choose whether to delete the whole office and all its data, or only your own account (we may ask you to transfer ownership of the office first). If you are another user, it deletes your own sign-in and account details; the office's inspection records belong to the business and stay with it. We ask you to confirm through a link we email you before anything is deleted. If you are the owner deleting the whole office, deletion is then scheduled 30 days later, and you can undo it with the link in the email during that time. While deletion is scheduled, you cannot sign in. Section 12 says how long deletion takes, and what we must keep by law (such as our billing records).
13.4 Withdraw consent. You can turn off AI features, Help improve dictation, Count taps (section 5.5A), photo suggestions (section 7.4A) and rewording on the phone (section 7.4B), stop Help train dictation and delete your recordings in the app (section 5.9), mark an inspection Don't use this inspection to improve Vistoria to leave it out of Report data use (section 7A.6), disconnect Google, refuse or withdraw phone permissions, and unsubscribe from our feature news at any time.
13.5 Ask us. To ask for access to, correction of, or deletion of personal information we hold about you, or to ask how we have used or shared it, email privacy@usevistoria.com. We may need to confirm who you are. We will answer within 30 days. If the law allows us more time and we need it, we will tell you why within those 30 days. We will not charge you, unless the request is clearly excessive and the law allows a fee. If we refuse a request, we will tell you why and how to complain.
13.6 If you are an inspector's client, send your request to your inspector. If you write to us, we will pass it on to them and help them respond.
13.7 Complaints. If you are not satisfied with our answer, you may complain to:
- the Office of the Privacy Commissioner of Canada, www.priv.gc.ca, 1-800-282-1376;
- the Office of the Information and Privacy Commissioner for British Columbia, www.oipc.bc.ca, 250-387-5629;
- if you live in Alberta, the Office of the Information and Privacy Commissioner of Alberta, www.oipc.ab.ca;
- if you live in Quebec, the Commission d'accès à l'information du Québec, www.cai.gouv.qc.ca, 1-888-528-7741.
13.8 If you live in the United States. Whatever state you live in, you can ask us for access to, correction of, deletion of, or a copy of the personal information we hold about you as our customer, as section 13.5 describes. We will answer within 30 days, and in no case later than 45 days. We do not sell or share personal information for cross-context behavioural advertising (and have not done so in the past 12 months), we do not use sensitive personal information to infer characteristics about anyone, and we will not treat you differently for exercising these rights. If we refuse your request, you can appeal by replying to our answer with "Appeal" in the subject line. We will answer the appeal within 45 days, and tell you how to contact your state's attorney general if you are not satisfied. An authorized agent may make a request for you, if they give us proof of their authority.
14. Security and breaches
14.1 We protect personal information with safeguards suited to its sensitivity, including:
- encryption in transit (HTTPS) for everything the apps and websites send;
- encrypted storage and encrypted backups;
- passwords stored only in hashed form;
- optional two-step sign-in;
- phone sign-ins that you can revoke;
- a screen lock on every phone: the app will not open on a phone that has no screen lock, and you can also have the app ask for your fingerprint, face or passcode each time it opens (Settings in the app; off unless you turn it on);
- on iPhone, the app's files that hold your inspections, photos and signatures can be read only while the phone is unlocked;
- removing what the app holds from a phone that should no longer have it. The inspections, photos, signatures and reports the app holds for your office are removed from a phone when you sign out of the app, when your office removes that phone (Settings → Phones in the office), or when the account or the office is deleted. If you sign out while something has not yet uploaded, the app asks first: you can upload it, or sign out and delete it. When your office removes the phone, or the account or office is deleted, the app does not ask: everything it holds for that account is removed the next time the phone reaches the office, including anything that had not uploaded. If a phone's sign-in ends for another reason (your password changed, you signed out everywhere, or the phone was unused for 90 days), the app signs out, removes what has already uploaded, and keeps what has not until you sign in again;
- a check that the app is genuine: when you sign in, and from time to time afterwards, our apps send us the result of a device and app integrity check made by Google (Play Integrity) or Apple (App Attest), so that we can confirm the app is the genuine Vistoria app and has not been modified;
- controls that keep each business's data separate from every other's;
- photos, files, reports and invoices served only to signed-in users of the office, or to someone holding their private link;
- limiting our own staff's access to what is needed, under confidentiality duties.
14.2 No system is perfectly secure. Please use a strong password, turn on two-step sign-in, and keep a screen lock on your phone (the app will not open without one). If a phone is lost, remove it in the office's Settings → Phones straight away: that ends its sign-in, and the app removes your office's data from it the next time it connects.
14.3 If something goes wrong. If a security breach affects information that an inspection business put into Vistoria, we will tell the business without undue delay, and within 72 hours of confirming it, and give it what it needs to notify the Privacy Commissioner and the people affected where the law requires. If a breach affects information about our own customers or users and creates a real risk of significant harm, we will report it to the Privacy Commissioner of Canada and any other authority the law requires (including US state authorities), and notify the people affected, as the law requires. We keep a record of every breach for at least 24 months.
14.4 When our support staff open your account. To fix a problem, our support staff may need to see your office as you see it. We ask first: you get an email saying who is asking, why and for how long (24 hours at most), and nothing opens unless you approve it while signed in. You can end the access at any time in Settings. In a security emergency, such as an account that appears to have been taken over, we may open an account without asking first. We then email the account straight away to say that we did and why, and that access lasts no more than 2 hours. If that email cannot be delivered, the access still opens; we keep trying to send it, and the same notice is shown in the office the next time you are signed in. We may also sign an account out of every browser and phone, unlock its sign-in or send it a password reset email, and we email the account each time. While in an account, support staff cannot change your password or two-step sign-in, add or remove people or change their roles, sign a phone in or out, send email as you, delete or export the account or any of its data, or change your plan or payment settings. We keep a record of every request and visit, and of every page opened and every change made during one, for 24 months.
15. If you are an inspector's client
This section is for homebuyers, sellers, real estate agents and anyone else whose information an inspection business puts into Vistoria. Links in Vistoria's booking pages, signing pages, reports and emails lead here.
15.1 Your inspector is in charge of your information. Your inspection company uses Vistoria to book inspections, sign agreements, write reports, send invoices and send emails. Your inspector decides what information about you is collected and how it is used. Vistoria stores it and handles it on their behalf, and does not use it for anything else, except to keep the service secure, to produce statistics that identify no one, filtered dictation text if your inspector chooses to share it (section 5.5), and de-identified report content as section 15.1A describes. It is stored in the United States (section 10).
15.1A Improving Vistoria. Unless your inspector has marked your inspection Don't use this inspection to improve Vistoria, Vistoria may use photos, video clips (without their sound) and written findings from your inspection to improve its software (section 7A). Before it does, your name, contact details, the property address, signatures, payment details and other identifying information are removed, and it never uses photos showing faces, licence plates or documents, the front of the house, photo location data, or inspections of properties in Quebec. To have your inspection left out, ask your inspector; if you write to us, we will pass your request on.
15.2 What is recorded when you sign. When you sign an agreement electronically, we record your name, your email address, the text you signed, your signature, the time, and your IP address and browser, so that the signature can be verified later. Unless your inspector has turned it off where the law allows, you are first asked to agree to use electronic records, and told how to ask your inspector for a paper copy. You receive a copy of what you signed by email. Keep it: your inspector decides how long Vistoria holds the record.
15.3 Booking. When you request an inspection on an inspector's booking page, what you enter goes to that inspector.
15.3A Changing or cancelling your booking. If you booked online, your confirmation and reminder emails have a private link to move or cancel your booking. It works until the cut-off your inspector sets (24 hours before the inspection unless they choose otherwise); after that, the page gives you their phone number and email. Your inspector, not Vistoria, decides any fees and refunds.
15.4 Your report. Your report is available at a private link that your inspector sends you. Anyone you share that link with can see the report.
15.5 Emails. You can stop review requests, thank-you notes and seasonal reminder emails with the unsubscribe link in any of them. It takes effect straight away.
15.6 Questions and requests. To see, correct or delete your information, contact your inspector. If you write to us at privacy@usevistoria.com, we will pass your request on to them and help them respond.
15.7 Payments. If you pay an invoice online, your payment is handled by your inspector's payment processor (currently Helcim) under its own privacy statement. We receive whether it was paid, not your card or bank details.
15.8 We never sell your information, use it for advertising, or market to you.
15.9 How long it is kept. Your inspector decides how long your information is kept. When they delete it, or their business leaves Vistoria, we delete it within the periods in section 12.
16. Emails and unsubscribing
16.1 Emails to our customers. We send service messages (receipts, security alerts, notice of changes), which you cannot opt out of while you have an account. We may also send news about Vistoria features to our customers; every such email identifies us, gives our mailing address, and has an unsubscribe link that takes effect within 10 business days at most.
16.2 Emails our customers send through Vistoria. Vistoria sends emails to inspectors' clients and agents in the inspector's name: booking confirmations, reminders, agreements, reports and invoices, and, only if the inspector turns them on, review requests, thank-you notes to agents and seasonal reminders. Those follow-up emails carry the inspector's name, postal address and contact details and a one-click unsubscribe, and they stop straight away, and in any case within 10 business days, when someone unsubscribes. When a job has more than one client (section 4.4), every client with an email address gets the job's booking confirmation, reminders, agreement and report, each addressed to them. The review request goes to the first client only. Seasonal reminders go to the first client only, unless the inspector turns on sending them to every client on a job.
16A. Notifications
16A.1 The Vistoria apps can show notifications: new bookings and booking requests, messages in your team room, tasks given to you, invoices sent or paid, and reminders before a job starts. Each person chooses which they receive, and quiet hours, in Settings → Notifications (on the phone or in the office); your phone's own settings can also turn them off.
16A.2 How they are delivered. Job reminders are set by your phone itself from its schedule and are not sent through anyone. On a locked phone, a reminder says only that an inspection is coming and when; it does not show the address or the client. The other notifications are sent by Vistoria's servers through Google's Firebase Cloud Messaging (and, for iPhones, Apple's push notification service). To do that, the app gives Vistoria a notification address for your phone (a "token"), and Firebase creates an identifier for the app's installation on your phone that it uses only to deliver them. What your phone shows is a short general line, such as "Vistoria: a booking update" or "Vistoria: a task for you", with no address, client name or message text. The details (such as the booking's date, address and client name, or the text of a team message) travel with the notification so that the app can show them once it is open, and so that a tap opens the right job. Google and Apple deliver it to your phone and do not use it for anything else under their terms with us. We delete a phone's token when you sign out, or when Google tells us the app is no longer installed.
17. Cookies and analytics
17.1 The Vistoria office (vistoria.report) uses only essential cookies:
- inspector_session, to keep you signed in;
- inspector_browser, to remember a browser you have chosen to trust for two-step sign-in;
- inspector_google_state and vistoria_accounting_state, which last only a few minutes while you connect Google or your accounting software, to protect that step against forgery.
It uses no analytics or advertising cookies. The pages we host for inspectors' clients use no cookies except as needed for security.
17.2 Our marketing site (usevistoria.com) uses Vercel Web Analytics and Vercel Speed Insights to count page visits and measure how fast pages load. They do not use cookies and do not identify you across sites.
17.2A Ad measurement on our marketing site. We advertise Vistoria on Google. Our marketing site, usevistoria.com, asks each visitor whether to allow ad measurement. Only if you accept does the site load Google's tag (Google Tag Manager and Google Ads), which tells us which of our ads lead to visits and sign-ups. Google LLC then sets cookies on usevistoria.com (such as _gcl_au, which lasts 90 days) and may use its own cookies on Google's sites. It receives the pages you visit on usevistoria.com, your IP address, your browser and device type, the ad you clicked to arrive if you came from one, and when you ask for a setup call, ask about the beta, or click to sign up or to open the demo office. It does not receive your name, your email address or anything else you type into our forms. We tell Google's tag not to use this information to personalize ads. Google handles it under its own privacy policy (https://policies.google.com/privacy), as an independent company, and may process it in the United States and other countries where it operates. If you decline, or don't answer, the tag is not loaded and nothing is sent to Google. Your answer is kept in your browser only. You can change it at any time with Cookie settings at the foot of every page on usevistoria.com; declining after accepting removes Google's cookies from usevistoria.com. The Vistoria apps and the office (vistoria.report) do not use this tag.
17.3 The apps do not use advertising identifiers or tracking tools, and we do not track you across other companies' apps or websites.
17.4 We do not respond to "Do Not Track" signals. The apps and the office do not track you across sites, and on our marketing site Google's tag runs only if you accept it (section 17.2A).
18. Children
Vistoria is for businesses and is not directed to children. We do not knowingly collect personal information from anyone under 16. Photos of homes may incidentally show children; inspectors control what they photograph. If you believe a child has given us personal information, contact privacy@usevistoria.com and we will delete it.
19. Changes to this policy
19.1 We will post changes here with a new effective date and version number. We will email our customers at least 30 days before a material change takes effect, and ask for consent where the law requires.
19.2 Earlier versions are available on request at privacy@usevistoria.com.
20. Contact us
LUMEWORK SOFTWARE INC. Attention: Privacy Officer Privacy questions and requests: privacy@usevistoria.com Everything else: support@usevistoria.com Mailing address: see the Company details at the top of this policy.